Products Category

Contact Us

Aliexpress:https://doesbot.aliexpress.com

Skype:admin#doesbot.com (#to@)

Website:https://www.doesbot.com/

Email:admin#doesbot.com (#to@)

Address:

CNCUSB Controller 4 axis Engraving Machine Control Board laser Engraving Machine Control Board

CNCUSB Controller 4 axis Engraving Machine Control Board laser Engraving Machine Control Board

1、Introduction The board is made of 1.6MM high quality A grade plate, which is reliable and stable. Input voltage (board power supply): 12V to 24V output signal: --Fan: used for spindle cooling, the voltage is consistent with the power su
Products Inquiry

Description


1、Introduction
 
The board is made of 1.6MM high quality A grade plate, which is reliable and stable.
 
Input voltage (board power supply): 12V to 24V
 
output signal:
 
--Fan: used for spindle cooling, the voltage is consistent with the power supply voltage, current 5A, G code M8 can be opened
 
--Spindle: Connect the spindle motor, the voltage is consistent with the power supply voltage, the current is 5A, and the spindle power is too large to connect the external relay as a switch. G code M3 is open and M5 is closed.
 
--High power spindle relay interface
 
--X-axis motor signal output, maximum current 1.5A.
 
--Y-axis motor signal output, maximum current 1.5A.
 
--Z-axis motor signal output, maximum current 1.5A.
 
--A-axis motor signal output, maximum current 1.5A.
 
--Manual control board interface: connect the manual control board
 
input signal:
 
--X-axis maximum range X+ and minimum value limit X-.
 
--Y-axis maximum range Y+ and minimum value limit Y-.
 
--Z-axis maximum range Z+ and minimum value limit Z-.
 
--A-axis maximum range A+ and minimum value limit A-.
 
--Reset button: press system reset, it can be used as emergency stop
 
Packing list:
 
--1*Motherboard
 
--4*A4988 drive 
 
--1*USB data line
 
2、Produce picture